Il vous faut environ
10.0
t d'enrobé
4.32
m³
72
m²
Quoting a paving job? Turn the tonnage into a priced estimate. Build a free estimate.
Get the next tool first
New free calculators and one short weekly tip for running a trades business — no spam, unsubscribe anytime.
How this is calculated
length × width × (thickness in ÷ 12) = cubic feet · × 145 lb/ft³ (hot-mix density) ÷ 2,000 = tons. Density varies by mix (about 140–150 lb/ft³) — confirm with your plant. Order a little extra for edges and handwork.
This is a planning estimate — always confirm against your supplier and the specifics of the job before ordering.
Asphalt calculator: FAQ
How much asphalt do I need?
Multiply length × width × thickness (in feet) for the volume, then by about 145 lb/ft³ and divide by 2,000 for tons. A 40 × 20 ft driveway at 2 inches is roughly 9.7 tons.
How many tons of asphalt per square foot?
It depends on thickness. At a compacted 2-inch depth, figure roughly 0.012 tons (about 24 lb) per square foot of hot-mix asphalt.
How thick should an asphalt driveway be?
A typical residential driveway is 2–3 inches of asphalt surface over a compacted aggregate base. Heavier loads or poor soil call for more.
More free tools
All toolsFacturation
Générateur de factures gratuit
Créez une facture nette et professionnelle et téléchargez le PDF gratuitement — sans inscription, sans filigrane.
Devis
Générateur de devis gratuit
Établissez un devis professionnel et téléchargez le PDF gratuitement — sans inscription, sans filigrane.
Paiements
Générateur de reçus gratuit
Créez un reçu de paiement net et téléchargez le PDF gratuitement — sans inscription, sans filigrane.